Make More with Data-Powered Production

We’ll see you in 2028!

WHAT HAPPENED IN OUR BOOTH

Grab a cup of coffee with Datanomix at IMTS.

The Coaching Lounge

Progress in manufacturing isn’t a single big play; it’s a series of small, steady wins that move the chains every shift, every day. Attendees grabbed free coffee and Datanomix gear while they joined in on the conversations and swapped notes with manufacturing leaders who run real shops, solve real problems, and share practical ideas that turn into real gains on the floor.

Catch play by play conversations in our First Down webinar series.

Watch the Webinars

The Coaches’ Workbench

Most vendors ghost you after the install. We coach you for life.

Datanomix customers pulled up to our workbench and got quality time with their Datanomix Coach in person at IMTS. Everyone who swung in brought questions they’ve been saving up: fine-tuning reason codes, dialing in the gemba walk, building a shift recap their operators will actually read, or tightening up the dashboards leadership has been asking for. If you had real questions, we had the answers

Learn More About Coaching

“I have to tell you, I love your Customer Success model. You won’t let us fail. You are there every step of the way to make sure we get the ROI, we get the value, and we make the improvements Datanomix is showing us we can.”

Devin Verhoest, Executive VP
G.P.R. Company Inc. | Fairfield, NJ

Live Demo Stations

Drive Data-Powered Production yourself. Step up to one of our interactive touch-screen kiosks and see Production Monitoring, ERP Insights, G-Code Cloud + DNC, Hexagon Esprit Edge Integration, TMAC ai, and ToolAnalytix in action.

New Datanomix customers see machine uptime climb 10–20% on day one.

Make More with Real-Time Production Monitoring

Your machine knows exactly what it’s doing. Now you will too.

Most shops assume they’re running at 80% utilization. The real number is closer to 40%. That gap doesn’t show up in your ERP, and it doesn’t show up in a shift report the next morning.

Datanomix Production Monitoring reads production data straight from the controller. No operator input. No dashboards to build, no reports to chase, no analytics to figure out. Just what’s running, what’s not, and what needs attention right now.

New Datanomix customers see machine uptime climb 10–20% on day one.

Request Your Pilot

Finally, ERP Data Meets Production Reality

Your ERP said the job would run in 12 hours. It ran in 19. Nobody knows why. That’s the ERPiphany moment, and it’s exactly what we fix.

Datanomix bridges the gap between planning and production by combining your ERP job plans, labor targets, and due dates with real-time machine performance.

The result? Live visibility into profitability, efficiency, and delivery. No spreadsheets. No manual tracking, and no waiting until month-end to find out if the job made money.

Learn More

Advanced G-Code Management & DNC Platform for CMMC 2.0 Compliance

The Right Program. The Right Rev. Every Machine, Every Shift.

CMMC 2.0 Phase 2 is paused. Your obligations aren’t. The deadline moved. The work didn’t.

G-Code Cloud + DNC is Datanomix’s GovCloud-native, ITAR-compliant platform that manages, modifies, and distributes programs and the Digital Production Bundle directly to the machine and operator.

The new Command Center in G-Code Cloud puts every program, every machine, and every open change request on one screen. The new Compliance Scanner reads your whole program library in seconds and tells you exactly which programs are missing a revision, an author, or tooling info. When auditors do show up, you’re ready.

Watch a Demo

Datanomix and Hexagon connect cloud-based NC program management with the shop floor

From Programming to Production:
Controlled. Secured. Compliant.

A program leaves the CAM seat for the floor on a network drive, an email, or a USB stick. Nobody can say for certain which rev is running, or who touched it last. That’s not a handoff. That’s a leap of faith.

The new Datanomix + Hexagon integration closes the gap. Program in Esprit Edge the way you do today. Every post lands in G-Code Cloud + DNC under revision control and reaches the operator as a complete Digital Production Bundle — print, setup sheet, tooling, and the program, all under one rev.

And it runs both ways. Edits made at the control come back to engineering as change requests, so the programmer decides what makes the next approved revision. Programming and production, finally one system of record.

See How it Works

Reduce Scrap, Costs, & Cycle Time While Increasing Tool Life

Catch the bad part before it leaves the spindle. Scrap happens when you find out too late.

Our joint solution with Caron Engineering connects to TMAC systems and builds per-cut machine learning models that run in real time to identify parts that were likely machined out of tolerance. Less scrap. Lower cost per part. Longer tool life. Faster cycle times.

Learn More

AI-Powered Tooling Cost & Process Control

Datanomix and Vallen teamed up to give manufacturers something the industry has never had: real visibility into tool usage and cost per part. ToolAnalytix^TM automatically identifying where money is being wasted and where quick improvements can be made.

Learn More

Learn About Our Strategic Partnerships

Modern manufacturing runs on connected technology, where machines, systems, and data all communicate so the right information reaches the right people at the right time. That’s the world we built Datanomix for. We connect to any ERP, so the numbers you count on line up with what’s actually happening on the floor. But connectivity is table stakes. The real story is who chooses to build alongside us.

We’re proud that Hexagon, Vallen, Caron Engineering, Fulcrum, and Paperless Parts picked Datanomix as their production monitoring partner and trust us to deliver value to their customers. There’s no higher compliment. Contact us to learn more about our strategic partnerships and unique integrations we’ve built.

Happy Hour at Seville Rooftop

Catch the party next time.

We teamed up with Fulcrum to provide attendees with better views and a room full of manufacturing people who actually wanted to talk to each other. Food, drinks, and no one trying to sell anybody anything.

Learn About our Partnership

Meet the Datanomix Team

The Datanomix Executives, Customer Success Coaches, and Sales Team were in the booth all week, and they’d love to hear from you. Don’t wait for the next IMTS, reach out to set up a meeting today.